Southern Exteriors installs new gutters for homeowners across Milton, GA. We form seamless aluminum runs on-site so each length fits your eave in one continuous piece, with no mid-run joints to leak later. Every gutter replacement in Milton, GA starts with a roofline measurement and a downspout plan. You approve the written price first, then the old metal comes off.
Gutter Replacement In Milton, GA
A Measured Roofline, A Downspout Plan, And A Price In Writing Before The First Section Comes Down
Seamless Aluminum Gutters Cut To Your Exact Eave Length, Formed Right In Your Driveway
Water pouring over the edge of your gutters, or streaking down the siding, is a sign the drainage has stopped keeping up. That’s usually where a gutter replacement in Milton, GA beats another round of resealing old sections.
Southern Exteriors handles residential gutters for homes with split seams, sagging runs, and gutters that spill in heavy rain. Afternoon storms drop a lot of water off a roof in a short window. Your drainage system has to move all of it clear of the foundation.
We start by measuring every length of roof edge and watching where the water goes now. Then we size the gutters and downspouts to that layout and put the whole plan on paper. You know the number before anything happens on your house.
How Southern Exteriors Handles Gutter Replacement In Milton, GA
Our gutter installation runs through the same order on every home, so nothing gets skipped along the way.
Measuring The Roofline And Tracking The Water
We start by measuring each run of the roof edge and noting where rain overflows, pools, or backs up on your current gutters. This tells us the right gutter size and where the downspouts need to land.
Reading the water path first means the new drainage system matches how your roof actually sheds rain, not a guess. It keeps runoff off your siding and away from the foundation.
Taking Off The Old Gutters And Checking The Fascia
Next, we remove the failing rain gutters and inspect the fascia board behind them. Old gutters often hide soft or rotted wood where water has been sitting. We flag any bad fascia before mounting new metal to it. Setting fresh gutters on solid wood is what keeps the hangers holding for the long run instead of pulling loose in a season.
Forming Seamless Runs In Your Driveway
We feed one coil of aluminum through a forming machine parked at your home and cut each run to the exact length of that eave. That’s what makes them seamless: no joints in the middle of a run to split open later.
Fewer seams mean fewer places to leak. Each length arrives at your eave already sized, so you don’t have to piece anything together up on the ladder.
Mounting, Pitching, And Water-Testing
Last, we secure each run with hidden hangers, set a slight slope toward every downspout, and seal the corners and end caps. The pitch is what pulls standing water off the metal and out the downspout. We finish by running water through the system to confirm it drains where it should. You see the gutters do their job before we pack up.
Choices To Lock In Before Your New Gutters Go Up
A handful of decisions shape how your gutters look and how much rain they carry.
Choosing Your Gutter Size
Most homes run well on 5-inch gutters. Steeper roofs or larger drainage areas often work better with 6-inch gutters, which carry more water in a downpour. We base the recommendation on your roofline length and how much runoff each section handles. Bigger isn’t always better, but the wrong size overflows in the storms that matter most.
Setting Downspout Placement
Downspout count and location decide where water lands once it leaves the gutter. We place them so runoff drops away from walkways, flower beds, and the foundation. More downspouts spread the load across a long roofline, so no single run gets overwhelmed. This gets settled before we start, not after the gutters are already hung.
Selecting A Finish Color
Seamless aluminum comes in a range of baked-on colors. You can match the gutters to the fascia, the trim, or the roof, depending on the look you want. The baked-on finish holds its color through years of sun and rain. Picking the shade up front means the whole roofline reads as one clean line when we’re done.
Why Choose Southern Exteriors For Gutter Replacement In Milton, GA
Here’s who we are and how that shows up on your Fulton County, GA gutter replacement job.
- Skilled Installers On Every Run. The same trained crew forms and hangs your gutters start to finish, so the pitch, the hangers, and the seals get set right.
- Homeowner Advocates On The Job: We work for you, not for the fastest ticket. That means an honest read on your fascia and a drainage plan built for your roof.
- Material From Trusted Sources: The aluminum coil we form your gutters from comes from suppliers we stand behind, so the metal holds shape and finish.
- Core Values That Reach The Eave: How we measure, quote, and finish a gutter job traces back to the same values we run the company on.
- A Family-Like Culture Behind The Crew: The people forming your gutters are part of a team that treats the work as its own, not a rushed hand-off.
What Homeowners Say About Southern Exteriors
Homeowners around the Southeast have described their exterior projects with Southern Exteriors, from the opening measurement through the final water test at the eave.
We’re very satisfied!…
I would highly recommend Southern Exteriors to anyone wanting to do exterior upgrades to their house. The folks there were, without a doubt, focused on quality work and service. We couldn't have asked for or have gotten better workmanship and service than this. We had Hardy Board installed on our house after 40 years of T-111 siding. Patrick, the sales rep, although he had only been with the company for a few months, knew the products the company offers very well. Not only this, he offered a variety of options and made sound recommendations in the decision making process. This was true with the siding as well as the gutters we have ordered. He is very pleasant and easy to work with. Tim, our project manager, is beyond compare. . . always responsive to any questions and concerns we had throughout the process. He himself repaired some inside wall board damage caused by the outside pounding of the installers (expected), perfectly matched the paint and did a beautiful job. He addressed with promptness any concerns we had both through email and his visits to our home to check on progress. Throughout this upgrading project we felt as though we were his only custoners and NEVER felt neglected! Thanks Tim!! At my request, Tim also recommended a painting company that was phenomenal. Again attention was given to quality of materials. workmanship and customer service. All caulking, priming and painting was done like clockwork as though they knew each others movement. It was estimated that the painting process would take 5-6 days. It was completed in 2 days and done well. The paint supervisor was also always accessible, checking on progress and addressing every concern we had. Remodeling is stressful! Southern Exteriors and its employees made this project stress-free and easy by their obvious competence and caring customer service. A BIG THANKS TO ALL WHO MADE THIS HAPPEN! We're very satisfied!
Will definitely use them again and already plan too for…
Best company I have dealt with in a long time. Ross was our design specialist for siding and he listened to our concerns and was very knowledgeable about their products. Will definitely use them again and already plan too for my roof.
He will get you where you need to be….
Blake was amazing, he was very understanding and made me feel comfortable. He wasn’t a pushy Salesman’s, more like a friend. If you’re choosing Southern Exterior PLEASE ask for Blake. He will get you where you need to be.
Gutter Replacement Questions From Milton, GA Homeowners
These come up most often before a Milton, GA gutter replacement project gets started.
Are downspouts included in the replacement?
A: Yes, downspout count and drainage layout are part of every gutter replacement we do. We map where water needs to land and place the downspouts to carry it clear of the foundation and landscaping. On a long roofline, we add downspouts so no single run gets swamped in a storm. The full plan is set before we start.
Do you offer gutter replacement outside Milton, GA?
A: Yes, Southern Exteriors serves homeowners throughout the wider Fulton County, GA area for gutter replacement. We handle seamless gutter installation for homes with leaking, sagging, or overflowing rain gutters across the region. The same measured process and written price apply wherever we work.
How long does a gutter replacement take?
A: Most residential gutter projects finish in a single day. We measure, remove the old runs, form the seamless aluminum on-site, hang everything, and water-test before we leave. Larger homes or complex rooflines with many corners can run longer. We include the expected timeline in the written quote.
How much does gutter replacement cost in Milton, GA?
A: Cost tracks mostly with your total roofline length, the gutter size you pick, and how many downspouts and corners the layout needs. A longer roofline with several corners takes more material and labor than a short, simple run. We give you a written price after measuring, and it holds through the job.
What gutter size fits my house?
A: Most homes do well on 5-inch gutters, while steeper roofs or bigger drainage areas often call for 6-inch. We base the size on your roofline length and how much water each section sheds. During the measurement, we watch where your current gutters overflow. That tells us whether stepping up to 6-inch is worth it for your roof.
What if you find rotted fascia during removal?
A: We show it to you and talk through the fix before mounting new gutters. Old gutters often trap water against the fascia, and that wood can go soft over time. New gutters need solid wood behind them to hold the hangers. Catching bad fascia at removal keeps your new system from pulling loose later.
Why go with seamless instead of sectional gutters?
A: Seamless gutters run as one continuous piece along each eave, so there are no joints in the middle of a run. Those mid-run joints are the first spots where sectional gutters leak. We form your seamless runs on-site to the exact length of each eave. Fewer seams means fewer places for water to escape down the road.
Receive Your Free Exterior Remodeling Estimate
Are you looking for a reliable, long-standing remodeling company in the Metro Atlanta area? Southern Exteriors has delivered high-quality roofing, siding, windows, doors, and gutters for over 25 years. Schedule your no-pressure, in-home consultation today and see why thousands of Georgia homeowners trust us to get it right the first time.
